Earlier, beautiful emerald lawns could be seen only near the large country houses of rich people. In the modern world, such glades adorn sites near shops and hotels. In order to properly lay the green coating, you must adhere to certain rules.

Do I need geotextiles for the lawn

The fact is that an ideal lawn requires close attention on the part of the owner, as well as care. Often, a geotextile is taken under the green coating.

Did you know? The largest lawn in Italy covers an area of ​​50 hectares. All of it is covered with green succulent grass, ideally paved with geotextiles.

• This material has several great advantages that will undoubtedly please the owner:
• Helps to get rid of the spread of weeds. However, this material will suppress only those weeds that have fallen into the soil under it, but will not affect those that are carried downwind.
• Geotextiles are excellent protection against moles. It will effectively protect the lawn, and will also not interfere with the growth of the plants necessary for the gardener.
• Prevents mixing of soil layers.

However, if you consider all the above advantages, you can see that there are cheaper products that can have such effects. For example, a mole net, which is several times cheaper, and does an excellent job in dealing with this underground pest.

Did you know? Dubai's Miracle Garden is the largest in the world, with an area of ​​72,000 m². The entire territory is strewn with 45 million flowers and decorated with a delicate green lawn.

Protection against weed seeds is also not exclusive, since airborne seeds will still germinate. It should also be noted that mixing the soil layers is a completely natural process, so you should not pay so much attention to this process.

Material selection

There are two types of materials that you will have to choose from if you want to create a green lawn. These include: geo-fabric and geo-canvas. The most suitable option is the second, as it is able to pass water, thereby nourishing and moisturizing the ground for the lawn. For planting grass, you must choose a canvas with a density of 100 g / m². Lawn grass is purchased at the discretion of the owner, however, the number of seeds per 1 m² should be at least 60 g.

The material should be laid so that each next sheet goes to the previous one, which means that upon purchase it is necessary to increase the amount of geo-canvas purchased.

Lawn geotextile technology

The technology for creating a beautiful lawn with lush green grass has its own characteristics. You need to be careful when preparing the land for planting, as well as correctly lay out the canvas.

Site preparation

Before you start laying geotextiles and planting plants, you must carefully prepare the soil.

Important! If a hole appears in the geotextile due to physical impact, such a sheet should not be used.

To do this, you must:

1. Remove garbage, including organic.
2. Level the surface by filling up the pits and cutting off the tubercles.
3. Mow the weed. Mowed stems should not be removed from the site, as in the future they will serve as a kind of compost fertilizer.

All this is done so that the lawn cover is smooth and juicy.

Laying geotextiles

Spread the fabric on mowed weed grass. In this area, geotextile rolls must be laid out with an overlap of at least 10 cm. In these places where the fabrics are on top of each other, they should be fastened with a metal or plastic U-shaped peg. This is done in order to preserve the location of each sheet in place when pouring land.

Important! If there are bushes or small trees in the territory, it is necessary to make a cross-shaped incision on the canvas, and then put it on through the top and lay it on the ground.

These pegs remain in the ground until the first grass appears and needs to be mowed. Fertile soil is laid on this layer, the thickness of which should be at least 12 cm.

Sowing grass

Seeds are sown on top of the fertile soil layer in a uniform layer. After that you need to walk around the site with a fan rake and tamp the ground. The last stage of planting is watering. It must be produced from a watering can, as the stream that flows through the hose can erode the soil and the coating will be uneven.

Further care

Caring for the young grass planted on this material is no different from the classic. Watering every 2 days, in addition, aeration is carried out. To do this, sod is pierced, as a result of which the soil is saturated with air.

The use of geotextiles is optional, as there are other means by which you can create the perfect lawn on the site. If it was decided to use it during work, it is necessary to strictly adhere to all the above rules. Then the site in a matter of days will turn into a paradise oasis and will delight all the people passing by.